Articulated Double Bunny

 

I tied up the classic double bunny streamer a long time ago and tried it out, see post here.  It was ok, but I knew I could make it more effective.   I have tied and tested this articulated version over the last 4 months working out the kinks so you don't have to.  This fly is durable, relatively easy to tie, and I have caught many different species of fish with it... all larger than average. It can be a time consuming pattern, however in my eyes it's worth it!  Below are the step-by-step tying instructions with pictures for one of my favorite streamer patterns.  Enjoy.

Step 1: Cut strips (4 for each fly) and insert hook through the back.   Repeat this process with as many flies as you plan on tying to save time. 

Step 2:  Start thread anywhere make a base (quickly, sloppy is ok) and leave thread at the eye.

Step 3: Tie off strip at eye.  Leave room at for a head and make sure strip is tight to the shank. 

Step 4:  Add top strip and tie in at the eye only.  Super glue head and strips together. 

Step 5: Mass produce the 'tails' before moving on. (this saves lots of time)

Step 6:  Attach wire(around 6" worth) and beads to all tails.  

Step 7:  Insert another streamer hook in the vise and start the thread near the back.  Tie in wire and tail leaving space for the beads.  

Step 8:  Tie down wire to the eye, and at the eye loop the wire back and tie that down too.  

Step 9:  Add heavy hour glass style eyes (leave room for the thread head).  

Step 10: Add bulk behind the eyes. (a surface for strip to glue down on... I use foam). 

Step11:  Add flash, legs, or whatever you want! (I use flash, light weight and lots of movement)

Step 12:  Mass produce this step. 

Step 13:  Using the previously cut strips attach strip through the hook at the back. 

Step 14: Tie down bottom strip, and add top strip all ahead of the eyes.  (this is the same  step as the tail)

Step 15:  Super glue strips and head and you're done! 

Mass produce... your friends will want some.